SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:CHANnel:INDex <integer> [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:CHANnel:INDex?
SCPI Example
State Saved	Yes
Preset	1
Min	1
Max	1
Initial S/W Revision	A.19.00

Name

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NAME [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NAME?
SCPI Example
State Saved	Yes
Preset	UL-SCH1
Initial S/W Revision	A.19.00

State

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh[:STATe]?
SCPI Example
State Saved	ON
Preset
Initial S/W Revision	A.19.00

Power

Range: -60.000 to 20.000 dB

Default: 0.000 dB Enter a power level, in dB for the selected channel.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:POWer <real> [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:POWer?
SCPI Example
State Saved	Yes
Preset	0
Min	-60
Max	20
Initial S/W Revision	A.19.00

RNTI

Range: 0 to 65535 (0x0000 to 0xFFFF)

Default: 1 (0x0001)

Specify the Radio Network Temporary Identifier (RNTI) for the transport block.

Available input methods are the decimal format and hexadecimal format.

Example: The decimal input "15" is displayed as "15 (0x000F)" and the hexadecimal input "0xf" is displayed as "15 (0x000F)".

See 3GPP TS 36.211 10.1.3.1 10.1.3.1 and 36.321 7.1 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:RNTI <integer> [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:RNTI?
SCPI Example
State Saved	Yes
Preset	1
Min	0
Max	65535
Initial S/W Revision	A.19.00

Transmission

Data

Use the data source selection dialog box to select PN9, PN15, PN23, or user defined bits to use for the data in the transport block.

This setting is visible only when NPUSCH is set to Format 1.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:DATA PN9\|PN15\|PN23\|USER [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:DATA?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:ULINk:ULSCh:DATA PN9 RADio:LTEFdd:WAVeform:CCARrier:NIOT:ULINk:ULSCh:DATA?
State Saved	Yes
Preset	PN9
Initial S/W Revision	A.19.00

MCS Index

Range:

When N_RU_sc = 1: 0 to 10
When N_RU_sc > 1: 0 to 13

Default: 0

This setting is available only when NPUSCH is set to Format 1.

See 3GPP TS 36.213 16.5.1.2 Table 16.5.1.2-1 and 16.5.1.2-2 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:MCS:INDex <integer> [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:MCS:INDex?
SCPI Example
State Saved	Yes
Preset	0
Min	0
Max	When N_RU_sc = 1: 10 When N_RU_sc > 1: 13
Initial S/W Revision	A.19.00

Modulation

Displays the NPUSCH modulation type.

See 3GPP TS 36.211 10.1.3.2 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:MODulation?
SCPI Example
State Saved	Yes
Preset	QPSK
Initial S/W Revision	A.19.00

TBS Index

Displays NPUSCH TBS Index which is determined by MCS Index.

This setting is available only when NPUSCH is set to Format 1.

See 3GPP TS 36.213 16.5.1.2 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:TBS:INDex?
SCPI Example
State Saved	Yes
Preset	0
Min	0
Max	12
Initial S/W Revision	A.19.00

Transport Block Size

Displays NPUSCH Transport Block Size which is determined by MCS Index and Number of Resource Units.

This setting is visible only when NPUSCH is set to Format 1.

See 3GPP TS 36.213 16.5.1.2 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:TBS:SIZE?
SCPI Example
State Saved	Yes
Preset	104
Min	16
Max	1000
Initial S/W Revision	A.19.00

RV Index Auto Configuration

Choices: Auto | Manual

Default: Auto

If RV Index Configuration is set to Auto, RV index is automatically set in order from the first element of RV index sequence.

If RV Index Configuration is set to Manual, you can set RV index manually in the UL-SCH Tx sequence window.

This setting is visible only when NPUSCH is set to Format 1.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform:RTIMe:CCARrier:NIOT:ULINk:ULSCh:RVINdex:CONFiguration AUTO\|MANual [:SOURce]:RADio:LTETdd:WAVeform:RTIMe:CCARrier:NIOT:ULINk:ULSCh:RVINdex:CONFiguration?
SCPI Example
State Saved	Yes
Preset	AUTO
Initial S/W Revision	A.19.00

RV Index Sequence

Enter the numbers of individual RV Index Sequence, separated by commas. For example, '0,2'. Only numbers and comma are allowed. The number less than or equal to 1 is rounded to 0. Others are rounded to 2.

Range of sequence length: 1 to 16

Range of each value: 0 or 2

Default: 0,2

If RV Index Configuration is set to Auto, then the RV Index Sequence setting is active. Otherwise, it is read-only.

If the parameter Retrans in the UL-SCH Tx sequence window is set to On, then the next RV Index in the RV Index Sequence is used for the RV Index of the UL-SCH transmission in the same subframe.

The RV Index Sequence setting is visible only when NPUSCH Format is set to 1 and RV Index Configuration is set to Auto.

See 3GPP TS 36.213 16.5.1.2 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:RVINdex:SEQuence [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:RVINdex:SEQuence?
SCPI Example
State Saved	Yes
Preset	0,2
Initial S/W Revision	A.19.00

Transmission Configuration Length

Displays the length of each NPUSCH (UL-SCH or UCI) transmission configuration, and the inserted gap length is displayed in parenthesis.

The waveform time length is set to Waveform Generation Length, even if Transmission Configuration Length is set longer than Waveform Generation Length.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform:RTIMe:CCARrier:NIOT:ULINk:ULSCh:TX:PARameter:LENGth?
SCPI Example
State Saved	Yes
Preset	1 ms (Gap: 0 ms)
Initial S/W Revision	A.19.00

NPUSCH Starting Subframe

Enter a value of the NPUSCH starting subframe index. One step resolution is 1 ms and 2 ms for 15 kHz and 3.75 kHz subcarrier spacing, respectively. NPUSCH transmission start is delayed from the beginning of waveform by setting NPUSCH Starting Subframe. This setting is in milliseconds.

Range: 0 to 159

Step: 15 kHz subcarrier spacing: 1 (1 ms)

3.75 kHz subcarrier spacing: Even number (2 ms step)

Default: 0

See 3GPP TS 36.211 10.1.2 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:STARt:SUBFrame <integer> [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:STARt:SUBFrame?
SCPI Example
State Saved	Yes
Preset	0
Min	0
Max	159
Initial S/W Revision	A.19.00

NPUSCH

NPUSCH Format

Choices: 1 | 2

Default: 1

Use the drop-down menu to set NPUSCH Format Type.

Format 1: Used for data transmission. (UL-SCH)
Format 2: Used for control information transmission. (UCI)

See 3GPP TS 36.211 10.1.2.3 and 10.1.3 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:FORMat FORMat1\|FORMat2 [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:FORMat?
SCPI Example
State Saved	Yes
Preset	FORMat1
Initial S/W Revision	A.19.00

Subcarrier Spacing

Choices: 15 KHz | 3.75 KHz

Default: 15 KHz

See 3GPP TS 36.211 10.1.2.1 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:SCSPacing SCS375\|SCS15 [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:SCSPacing?
SCPI Example
State Saved	Yes
Preset	SCS15
Initial S/W Revision	A.19.00

Number of Subcarriers in Resource Block

Displays Number of Subcarriers in Resource Block.

See 3GPP TS 36.211 10.1.2.1 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SUBCarriers:RBlock <integer> [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SUBCarriers:RBlock?
SCPI Example
State Saved	Yes
Preset	12
Min	1
Max	48
Initial S/W Revision	A.19.00

Number of Subcarriers in Resource Unit (N_RU_sc)

Choices: 1 | 3 | 6 | 12

Default: 12

See 3GPP TS 36.211 10.1.2.3 for more information.

This setting is selectable only when NPUSCH Format is 1 and Subcarrier Spacing is 15 kHz. Otherwise, this setting is read-only and automatically decided.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SUBCarriers:RUnit SC1\|SC3\|SC6\|SC12 [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SUBCarriers:RUnit?
SCPI Example
State Saved	Yes
Preset	12
Initial S/W Revision	A.19.00

Subcarrier Offset in RB (N_sc)

Choices: Depends on Number of Subcarriers in Resource Unit (N_RU_sc) and Subcarrier Spacing as below.

N_RU_sc 12, 15 kHz: 0

N_RU_sc 6, 15 kHz: 0 | 6

N_RU_sc 3, 15 kHz: 0 | 3 | 6 | 9

N_RU_sc 1, 15 kHz: 0 to 11 3.75 kHz: 0 to 47

Default: 0

See 3GPP TS 36.213 16.5.1.1 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SUBCarrier:OFFSet SC0\|SC1\|SC2\|SC3\|SC4\|SC5\|SC6\|SC7\|SC8\|SC9\|SC10\|SC11\|SC12\|SC13\|SC14\|SC15\|SC16\|SC17\|SC18\|SC19\|SC20\|SC21\|SC22\|SC23\|SC24\|SC25\|SC26\|SC27\|SC28\|SC29\|SC30\|SC31\|SC32\|SC33\|SC34\|SC35\|SC36\|SC37\|SC38\|SC39\|SC40\|SC41\|SC42\|SC43\|SC44\|SC45\|SC46\|SC47 [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SUBCarrier:OFFSet?
SCPI Example
State Saved	Yes
Preset	SC0
Initial S/W Revision	A.19.00

Number of Resource Units (N_RU)

Choices: 1 | 2 | 3 | 4 | 5 | 6 | 8 | 10

Default: 1

See 3GPP TS 36.211 10.1.3.6 and 36.213 16.5.1.1 for more information.

This setting is selectable only when NPUSCH Format is 1. Otherwise, it is read-only and automatically set to 1

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:RUnits:COUNt One\|Two\|Three\|Four\|Five\|Six\|Eight\|Ten [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:RUnits:COUNt?
SCPI Example
State Saved	Yes
Preset	One
Initial S/W Revision	A.19.00

Number of Repetitions (N_Rep)

Choices: 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128

Default: 1

See 3GPP TS 36.211 10.1.3.6 and 36.213 16.5.1.1 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:REPetitions REP1\|REP2\|REP4\|REP8\|REP16\|REP32\|REP64\|REP128 [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:REPetitions?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:ULINk:ULSCh:NPUSch:REPetitions REP1 RADio:LTEFdd:WAVeform:CCARrier:NIOT:ULINk:ULSCh:NPUSch:REPetitions?
State Saved	Yes
Preset	REP1
Initial S/W Revision	A.19.00

Number of Slots in Resource Unit (N_UL_slots)

Displays Number of Slots in Resource Unit (N_UL_slots).

See 3GPP TS 36.211 10.1.2.2 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SLOTs:RUnit?
SCPI Example
State Saved	Yes
Preset	1
Min	1
Max	16
Initial S/W Revision	A.19.00

Number of Consecutive Slots for RV Index (B)

Displays Number of Consecutive Slots for RV Index (B).

See 3GPP TS 36.213 16.5.1.2 for more information

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SLOTs:CONSecutive:RVINdex?
SCPI Example
State Saved	Yes
Preset	1
Min	1
Max	80
Initial S/W Revision	A.19.00

Number of Consecutive Transmission Slots (N)

Displays Number of Consecutive Transmission Slots (N).

Number of Consecutive Transmission Slots (N) = (N_RU) x (N_Rep) x (N_UL_slots)

See 3GPP TS 36.213 16.5.1.2 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SLOTs:CONSecutive:TRANsmission?
SCPI Example
State Saved	Yes
Preset	1
Min	1
Max	2560
Initial S/W Revision	A.19.00

Number of Mapping Slots for NPUSCH (N_slots)

Displays Number of Mapping Slots for NPUSCH (N_slots).

See 3GPP TS 36.211 10.1.3.6 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SLOTs:MAPPing?
SCPI Example
State Saved	Yes
Preset	1
Min	1
Max	16
Initial S/W Revision	A.19.00

Number of Repetitions of Identical Slots (M_NPUSCH_identical)

Displays Number of Repetitions of Identical Slots for NPUSCH (M_NPUSCH_identical).

See 3GPP TS 36.211 10.1.3.6 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SLOTs:IDENtical:REPetitions?
SCPI Example
State Saved	Yes
Preset	1
Min	1
Max	8
Initial S/W Revision	A.19.00

NPUSCH All Symbols

Choices: Off | On

Default: On

When this setting is set to Off, the resource elements in SC-FDMA symbols overlapped with a symbol configured with SRS according to SRS Subframe Configuration shall be counted in the NPUSCH mapping. But these resource elements are not used for transmission of the NPUSCH.
When this setting is set to On, all NB-IoT symbols for NPUSCH are transmitted.

See 3GPP TS 36.211 10.1.3.6, and 36.331 6.7.3.2 for more information.

This setting is active only when Operation Mode in the Uplink node is In-Band. Otherwise, it is read-only and automatically set to On.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:SYMBols:ALL[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>: NIOT:ULINk:ULSCh:NPUSch:SYMBols:ALL[:STATe]?
SCPI Example
State Saved	Yes
Preset	ON
Initial S/W Revision	A.19.00

DM-RS NPUSCH

Multi-Tone Base Sequence Auto Calculation

Choices: Off | On

Default: On

Turns the automatic calculation for base sequence index parameter on or off.

On: Automatically calculate Base Sequence Index
Off: Manual input is available.

This setting is available only when Number of Subcarriers in Resource Unit (N_RU_sc) is 12, 6, or 3 (multitone). Otherwise, it is disabled and read-only.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:MTONe:BSEQuence:AUTO[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:MTONe:BSEQuence:AUTO[:STATe]?
SCPI Example
State Saved	Yes
Preset	ON
Initial S/W Revision	A.19.00

Multi-Tone Base Sequence Index (u)

Range: 0 to 29 (maximum value depends on Number of Subcarriers in Resource Unit)

Default: 1

Enter a value for Multi-Tone Base Sequence Index (u). It is used for DM-RS NPUSCH when group hopping is not enabled.

This setting is available only when the following conditions are met:
- Multi-Tone Base Sequence Auto Calculation is Off
- Number of Subcarriers in Resource Unit (N_RU_sc) is 12, 6, or 3 (multitone)
- Group Hopping is Off.
Otherwise, it is automatically decided (in case of multitone) or disabled and read-only (in case of singletone).

See 3GPP TS 36.211 10.1.4.1.2 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:MTONe:BSEQuence:INDex <integer> [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:MTONe:BSEQuence:INDex?
SCPI Example
State Saved	Yes
Preset	1
Initial S/W Revision	A.19.00

Cyclic Shift (alpha)

Range:

0 to 2 (N_RU_sc = 3)

0 to 3 (N_RU_sc = 6)

0 (N_RU_sc = 12)

Default: 0

Enter a value for Cyclic Shift (alpha).

This setting is available only when Number of Subcarriers in Resource Unit (N_RU_sc) is 12, 6, or 3. Otherwise, it is disabled and read-only.

See 3GPP TS 36.211 10.1.4.1.2 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:MTONe:CYCLic:SHIFt <integer> [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:MTONe:CYCLic:SHIFt?
SCPI Example
State Saved	Yes
Preset	0
Min	0
Max	11
Initial S/W Revision	A.19.00

Group Hopping

Choices: On | Off

Default: Off

This setting is available only when NPUSCH Format is 1. Otherwise, it is disabled and read-only.

See 3GPP TS 36.211 10.1.4.1.3 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:MTONe:GROUp:HOPPing[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:MTONe:GROUp:HOPPing[:STATe]?
SCPI Example
State Saved	Yes
Preset	OFF
Initial S/W Revision	A.19.00

Group Assignment for NPUSCH (Delta_SS)

Range: 0 to 29

Default: 0

Enter a value for Delta SS.

This value is used to calculate the sequence-shift pattern for DM-RS NPUSCH.

This setting is available only when Group Hopping is On and NPUSCH Format is 1. Otherwise, it is disabled and read-only.

See 3GPP TS 36.211 10.1.4.1.3 for more information.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:DSS <integer> [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:NPUSch:DSS?
SCPI Example
State Saved	Yes
Preset	0
Min	0
Max	29
Initial S/W Revision	A.19.00

Transmission Config

Sequence Number

Displays the sequence number.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform:RTIMe:CCARrier:NIOT:ULINk:ULSCh:TX<channel>:SEQ:INDex?
SCPI Example
State Saved	Yes
Preset	1
Min	1
Max	160
Initial S/W Revision	A.19.00

Resource Unit Index

Displays the resource unit index.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform:RTIMe:CCARrier:NIOT:ULINk:ULSCh:TX<channel>:RUNIT:INDex?
SCPI Example
State Saved	Yes
Preset	0
Min	0
Max	15
Initial S/W Revision	A.19.00

HARQ-ACK Info

Range of each value: ACK or NACK

Default: ACK

Displays the HARQ-ACK value.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:CCARrier:NIOT:ULINk:ULSCh:TX<channel>:UCI:HARQ:INFO ACK\|NACK\|ACKACK\|ACKNACK\|NACKACK\|NACKNACK\|ALLACK\|ALLNACK\|USER [:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:CCARrier:NIOT:ULINk:ULSCh:TX<channel>:UCI:HARQ:INFO?
SCPI Example
State Saved	Yes
Preset	ACK
Initial S/W Revision	A.19.00

Slot Index

Displays the slot index.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform:RTIMe:CCARrier:NIOT:ULINk:ULSCh:TX<channel>:TX:INDEX:INFO?
SCPI Example
State Saved	Yes
Preset	0/0
Min
Max
Initial S/W Revision	A.19.00

Enabled

Displays the sequence state.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform:RTIMe:CCARrier:NIOT:ULINk:ULSCh:TX<channel>[:STATe]?
SCPI Example
State Saved	Yes
Preset	ON
Min
Max
Initial S/W Revision	A.19.00

MCS Index

Displays the MCS index. Sets the value of the Modulation and Coding Scheme (MCS) Index value.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:TX<channel>:MCS:INDex?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:ULINk:ULSCh:TX:MCS:INDex?
State Saved	Yes
Preset	7
Min	0
Max	10
Initial S/W Revision	A.19.00

Modulation

Displays the modulation type.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:TX<channel>:MODulation?
SCPI Example
State Saved	Yes
Preset	QPSK
Initial S/W Revision	A.19.00

TBS Index

Displays the TBS index. Sets the value of the Transport Block (TB) Index.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:TX<channel>:TBS:INDex?
SCPI Example
State Saved	Yes
Preset	7
Min	0
Max	12
Initial S/W Revision	A.19.00

Transport Block Size

Displays the block size. Sets the value of the Transport Block (TB) Size.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:TX<channel>:TBS:SIZE?
SCPI Example
State Saved	Yes
Preset	16
Min	16
Max	1000
Initial S/W Revision	A.19.00

RV Index

Range of each value: 0 or 2

Default: 0

When RV Index Configuration is 'Auto', RV Index is read-only.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:CCARrier:NIOT:ULINk:ULSCh:TX<channel>:RVINdex:INDex <integer> [:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:CCARrier:NIOT:ULINk:ULSCh:TX<channel>:RVINdex:INDex?
SCPI Example
State Saved	Yes
Preset	0
Initial S/W Revision	A.19.00

Power

Range: -60.000 to 20.000 dB

Default: 0.000 dB

Displays the power. Sets the power of the sounding reference signal, in dB.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:TX<channel>:POWer <real> [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:TX<channel>:POWer?
SCPI Example
State Saved	Yes
Preset	0
Min	-50
Max	10
Initial S/W Revision	A.19.00

DMRS Power

Range: -60.000 to 20.000 dB

Default: 0.000 dB

Displays the power. Enter a power level, in dB for the UL-SCH.

SCPI Command	[:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:TX<channel>:DMRS:POWer <real> [:SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:ULINk:ULSCh:TX<channel>:DMRS:POWer?
SCPI Example
State Saved	Yes
Preset	0
Min	-60
Max	20
Initial S/W Revision	A.19.00